|
Thin walled tubes are
produced by paste extrusion in different dimensioning and colours.
They are mostly employed for
dielectric insulations, anticorrosion protection and for fluid transfer.
Small dimension tubes
"Spaghetti" are manufactured as per AMS Standards in 3 dimension
families.
Larger dimensions are produced in metric dimensions.
Coil
length and number of joints depend on tubings dimensions.
Available
upon request:
- Thin-wall
tubings with various ID and thickness also colored (pigmented).
Dimensions
Tolerances ISO
13000 -1 sec. 4.2.4
Internal diameter tolerances Id
| from
(mm) |
to
(mm) |
Tol.
(mm) |
| ...
5,0
|
5,0
30,0
|
+/ - 0.25
+ /- 5%
|
thin wall tolerances Sp
| from
(mm) |
to
(mm) |
Tol.
(mm) |
|
...
1,0
|
1,0
2,0
|
+/- 0,10
+/- 10%
|
|
|
|
