|
Gapi
Group Home
Group
Products
O-Rings - rubber
O-Rings - FEP
O-Rings - PTFE
Rubber Cords
Back-up - PTFE
PTFE Stock Shapes
Virgin PTFE
Virgin
PTFE
Properties
Datasheet
Filled PTFE
Filled
PTFE
Properties
Datasheet1
Datasheet2
Products
Extruded
rods
Moulded
rods
Extruded
tubes
Moulded
tubes
Skived
tapes
Sheets
Spaghetti
tubings
Saturflon
glass
Unsintered
rods
Expanded
PTFE
Anticorrosion
linings
Flexible-braided
Oil Seals
Lip seals -
polyurethane
Lip seals - rubber
Wiper rings
Composite
- Rubber
Composite - PTFE
Thin Walled Tubes PTFE
Finished Parts
Rubber
Finished Parts PTFE
Polyurethane Parts
TORLON® (*)
Bonded Seals
Vulkollan® (**)
Braided Packings
Metal gaskets
Contact
us
gapigroup@
gapigroup.com
(*) Torlon®
Trademark
Solvay Belgium
(**)
Vulkollan® Trademark Bayer Leverkusen Germany
Gapi®
Trademark Gapi Italy
Produced
by:
Terms
and use of our Web-site
Copyright © 1998-2007
All Rights Reserved
|
|
PTFE
extruded tubes
| Sales
terms
Extruded tubes are supplied in
standard lengths of 2 m up to nominal diameters of 80 mm, and 1 m for
larger diameters.
Available upon request:
- extruded tubes in different lengths
and diameters
- centerless-ground extruded tubes up
to 60 mm diameters (tolerances of 0/+0,05 mm up to 25 mm diameters;
0/+0,1 mm for diameters larger than 25 mm)
- tubes extruded in standard filled
grades with slightly larger tolerances.
. Dimensions:
internal diameter from 4 to 25
. Dimensions:
internal diameter from 30 to 95
Tolerances on diameters as per
Standard ISO 13000-1 Par 4.2.5 (virgin PTFE)
| OD/ID
(mm) |
OD
(mm) |
ID
(mm) |
| over |
up
to |
10
20
30
50
100 |
20
30
50
100
120 |
-0 |
+
6% |
-
6% |
+0 |
Tolerances on
length mm
-0 +2% (Virgin
PTFE)
|
|
|
|
